|
#1
|
||||
|
||||
Breather baffles, where ?
I need 2 valve cover breather baffles for small block M.P. cast alum. covers and cant find them in catalog and the parts people say they dont sell them. Anyone know where to get them ? Or have extra's ?
|
#2
|
||||
|
||||
Make your own. Thin piece of sheet metal with two holes for the screws to pass through. They mount under the openings in the valve cover and most have screw holes in place.
|
#3
|
||||
|
||||
They can be made of cheap aluminum scaps. Cut into rectangles and add a slight bend on the long edges. Drill 3 small holes for the screw. Install!
Ya need size specs? |
#4
|
||||
|
||||
No dont need specs. Need time to get scrap. I only have a couple hours on the weekends now to do anything so was hoping to just buy them and slap em on.
|
#5
|
||||
|
||||
Breathers
Darren, I have the same need at you have for my 72 Cuda 360.
I also don't want to fab something like this. If you find an easier answer, please let me know. Tim at eckertt@epri.com eckertt@epri.co 72 Cuda 360/904 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
valve cover oil baffles | ram | Ram Truck Chat | 0 | 02-17-2005 05:03 PM |
Lifter valley baffles? | roadracerjeff | Performance Talk | 11 | 11-27-2003 03:56 AM |
Foam Speaker Baffles | Chevy2Dodge | Car Audio Forum | 2 | 04-26-2003 03:28 PM |
Milodon valley baffles. | swinging340 | Performance Talk | 6 | 05-12-2001 10:44 PM |
Fuel cells - foam or baffles | Marc | Performance Talk | 6 | 09-22-2000 03:27 AM |