|
#1
|
||||
|
||||
max valve size on .030 383
I'm getting my 383 back together a lil at a time and had heard something about oversize valves not fitting the stock 4.25" bore. I'm going .030 over and have 2.14 & 1.81 manley pro flo valves in a milled .040 #516 head, I'm useing speed pro forged flat tops and was wondering if I will have to notch the bores my cam is .465/.488 lift.everything is at the machine shop now so i cant take any measurements.Does anyone have any info on how big the valves can go.
|
#2
|
|||
|
|||
They will fit fine, but will be shrouded a little bit cause the intake valve is close to the bore. A little work with a die grinder to open the head to the bore line will help a little. The Maxi's had notches on the exhaust side for the larger 1.88" valves and the same 4.25" bore.
|
#3
|
||||
|
||||
Thanks Jelsr I'll sleep better tonite. I love this board.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
valve size | pishta | Performance Talk | 29 | 10-23-2009 01:37 AM |
Valve stem size? | Ray Bell | Slant Six Chat | 2 | 02-21-2008 07:18 AM |
Intake valve size | Dauer 33 | Circle Track Chat | 5 | 12-27-2007 01:12 PM |
valve size | Big Block Ram | Performance Talk | 9 | 09-26-2002 09:08 AM |
Valve Size on 906 casting heads | jlcoffell | Vintage MOPAR chat | 1 | 05-13-2002 08:09 PM |