|
#1
|
|||
|
|||
looking for old Cam Dynamics info for BB
anyone know of where i can find specs for ,or an old catalogue on CD grinds. reason is ,i'm doing a 440 now&the short block is good...putting new edelbrock heads on,,rockerss,,etc...u put the cam in over 15years ago and cant remember the specs...but i know its a mild cam,,,about .450 lift and around 210? at .050 ,,i think its 108 sep? and it might have been called a stage 1? any help would be great..thnx
|
#2
|
||||
|
||||
Stage One 290 H12:
214*/224* @ .050", 112* lobe seperation, .443"/.465" lift Energizer 266 H10 Group II: 210*/210* @ .050", 110* lobe seperation, .440"/.440" lift Energizer 272 H10 Group II: 216*/216* @ .050", 110* lobe seperation, .454"/.454" lift To be 100% sure of what you have, you would have to carefully measure the lift at the cam and multiply by 1.5 or actual lift at the valve using a blocked hydraulic or solid lifter. (Taking into consideration a little lift loss due to pruduction tolerences and geometry.) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Throttle body info on Turbo 2 car info on upgrade needed..... | Mopard | Front Wheel Drive Chat | 5 | 01-30-2005 11:26 AM |
need info... | mrfreeze | Diesel & Turbo Diesel Chat | 0 | 07-10-2002 08:28 AM |
Lots of good tech ?'s for engine guys! (w-5 info? indy info? max hp stock block?) | dizuster | Drag Racing Forum | 8 | 03-15-2002 08:54 AM |
ENDYN Energy Dynamics site | Kenneth B. Hollman | Drag Racing Forum | 8 | 01-10-2002 07:50 AM |
Pre 60's rear axle info and upgrades, much info out there? | Stoga | Restoring your MoPar (Tricks & techniques) | 3 | 11-06-2000 07:25 PM |