|
#1
|
||||
|
||||
Magnum and non magnum headers
Would the heads off a 93 magnum 360 use the same header flange at the exhaust port as a non magnum 360? thanks
|
#2
|
||||
|
||||
Ralley I've never tried to bolt a set of headers up to them but I did use a set of header gaskets made for a LA on a 93 magnum and they worked fine so they must be the same.
|
#3
|
||||
|
||||
The exhaust manifolds or headers will bolt up, ports are not exact but close enuff.
|
#4
|
||||
|
||||
My problem is I find headers for 93 on up dakotas but I swapped in a 360 into my 87 and finding headers looks like a problem. I don't want to make them but will if I have too!
|
#5
|
||||
|
||||
Question may be are the ports any higher off the deck height. That may cause clearance issues underneath. I dont know myself.
|
#6
|
||||
|
||||
oops. duplicate
|
#7
|
||||
|
||||
Summit has them listed online for older models. Only Hookers are available so their pricey but at least they are avail. and their full length.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Magnum headers | scott360 | Dakota Truck Forum | 6 | 07-15-2002 09:20 PM |
Headers- magnum or non magnum | scott360 | Performance Talk | 3 | 07-10-2002 11:03 PM |
headers for magnum 318?? | bowpsycho | Performance Talk | 5 | 03-14-2000 06:38 AM |
Why won't 3.9 V6 headers fit Magnum V6? | Shnoz | Jeep Chat (Wrangler, Cherokee, etc...) | 2 | 02-08-2000 05:17 AM |
Why don't 3.9 V6 headers fit Magnum V6 ? | Shnoz | Performance Talk | 0 | 02-04-2000 06:11 PM |