help

[truck88]

Thanks for the reply to my first post but the orginal engin bay harness got fried by a short and i need a new one for a carburated motor I have the dis. voltage reg. and ristor and a msd six al boxI just cant find a herness from the fire wall out anybody have any soruces that can help

[rumblefish360]

I don't know where your last questioned post is, but you started a new topic and leaves me and others in the dark. Look to the lower left for "Post Reply" button to continue the thread.

[custom880]

truck you have an 88 D150 if I remember correct. Try a local pick and pull junkyard. There should be some trucks in there. 88 isn't that long ago and the trucks are probably showing up.

[truck88]

the qusetion is I need a wiring harness for a carbarated motor because the old motor was FI and the harness got fried next to the fire wall I got a new motor built by rollins speed shop for it I need a new harness for the new motor but I would like a new harness not a used one if I can help I would appreciate it thanks

[rumblefish360]

Run down to the dealer. They are to make parts for what ever vehicle they make for 10 years. There could very well be something on the shelf.
I have seen '79 Dodge Magnum headlight covers brand spankin new just up until a few years ago.