Video of my tailpipes... (New camera test)

[TK]

I am trying to figure out how to use the flash, and I will get pics of underneath....
Manifolds, X pipe, 2 1/4" magnaflows......tiny bit of a cam.....

http://s12.photobucket.com/albums/a2...t=S8000022.flv

[TK]

[dust]

*replay*

Reminds me of my 360 before the rebuild, I can almost smell the unburnt gas...

[Shaun]

DT,it sounded good! I wondered what it would sound like when it was warm? I saw H2O coming out of the pipes? It is cold there? The engine was cold? Must have been. Do you have a breather tube hooked into your air cleaner from your valve cover? Get rid of it. Run breathers without assist. Opinions though,DT. You know what you've got. And it sounds good for a smallpar.
Shaun

[rumblefish360]

Damn, I got no sound, WWWAAAAAAAAAAAAAA!!!!!!!

[TK]

It was warm! It is always making water, never figured that out........

[cageman]

because that is what happens when hydrocarbons burn.
Your supposed to get so much water for everygallon burned.
sounds good

[Chuzz]

Nice sounding ride, dude. What size cam you got in there?

[TK]

Iskendarian cam, 268/276, 480/480, 110.
They're version of a stock 340 cam, I guess.

[Dick]

Originally Posted by dodgetruckboy

It was warm! It is always making water, never figured that out........

That's 'cause it's a pisser.

So, why didn't you goose the loud pedal a couple of times so dw (and the rest of us) could hear how a bad-ass 'teen really sounds?

[it's all dodge]

Wished I'd done that with my 318 1983 truck, I have dual 2 1/4s, into a dual in/out muffler, and I haven't heard it run with the mufflers yet, and now this computer will not let me hear yours, 2 more monthes left! uuuuugggghhhhh!!!!

[TK]

Because it isn't bad ass........it's a turd, compared to how it will run soon.
And, I cant reach the pedal and the pipes at the same time. Tell you what, if I get the "cut" feature figured out, I'll post an update.
have to do it in the dark though, so you cant see the valve guide smoke roll.....................

[cageman]

who cares, let er rip.

[TK]

OK........................One 8-1 318 with regular gas coming up..............
Stock springs..........
accelerator pump is set on the lowest shot too.............

http://s12.photobucket.com/albums/a2...t=vroom008.flv

[rumblefish360]

ARRRRRRRRRRR, now I see and hear nothing!!!
WAAAAAAAAAAAAAAAAAAAAAA!!!!!!!!

[1973Swinger]

Something is screwed with that video TK, I can hear sound and see something on the video but you cant make it out, its way too dark.

[TK]

It WAS dark..........................
Sun is going away fast up here.

[1973Swinger]

How many hours of sunlight are you guys down to up there now?

[rumblefish360]

You need to move a bit south.

[451Mopar]

sounded good, I liked the X-pipe too.
Do the mufflers have small drain holes drilled in them?
When they sit on their sides, the water collects on the bottom. Usually a small 1/8" hole will allow the water to drain from the muffler.

[TK]

I drained a small hole in them when I put them in, LOL...
They have a drain, but it is made to be flat.............
It still makes water, all the time, the exhaust doesn't stink real bad either, not as bad as you would think with the cam that it has, and the low compression.........................

[451Mopar]

You probbably have more humidity where you live

My 360 may have just developed a problem, #3 exhaust cam lobe may be going flat, or the lifter may be sticking? Valve train was ticking and that rocker needed to be tightened a bit more than the others, and I can still hear a slight ticking sound?

[TK]

yup, lifter or cam...........................unless you have a rocker problem, is it a comp cam?

[451Mopar]

No it's a Hughes HE0914AL Cam, with 1.6:1 Crane Gold Aluminum roller rockers. The rocker arms and pushrod looked OK.

Sorry to change the subject, but thanks for the help.