|
|
|
|||||||
|
#1
10-30-2013, 02:53 PM
|
|||
|
|||
Shifter handle question?
I have to replace the clutch in my 95 Dakota, 2.5 liter/5speed. The Haynes manual is a little vague on how to remove the shifter handle before the transmission is removed. I replaced a clutch in my 91 Dakota but it used a different transmission. Another question I had was which type gear lube/oil should I use? The tag on the fill plug is no longer there. Thanks for any help you give.
|
|
#2
10-31-2013, 02:01 PM
|
|||
|
|||
|
If the shift handle doesn't thread on it probably presses on, the factory manual shows a special tool to remove the press-on...not sure if it can be removed without the tool.
The AX-15 transmission in your Dakota uses 75w-90 gear oil. I would use a synthetic like Red Line 75w-90NS.
|
|
#3
10-31-2013, 02:24 PM
|
|||
|
|||
|
Thanks for the reply John. The Haynes manual shows a special tool but I am not sure if it is required for this tranny. Were there any other 5 speeds transmissions besides the AX-15 offered in this year?
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| T-handle shifter screw | Fourmopar | Parts Wanted | 3 | 06-12-2014 08:28 AM |
| Bad vibration in shifter handle and pedals | oldhifi | Performance Talk | 9 | 06-06-2006 08:37 PM |
| Shifter handle removal | GaryS | Restoring your MoPar (Tricks & techniques) | 0 | 03-03-2004 12:43 PM |
| 70 roadrunner pistol grip,how do i get the handle out of the shifter? | moopa | Vintage MOPAR chat | 3 | 03-26-2003 06:06 PM |
| Removing shifter handle? | trucker | Ram Truck Chat | 7 | 03-21-2002 09:45 PM |
Linear Mode
