|
#1
|
|||
|
|||
2.5 Liter Pan Removal
After struggling for several hours trying to remove the pan to replace it I thought someone may have some tips I can try. I have loosened the motor mount bolts, the cross member bolts,the steering rack, and the transmission mount bolts. I can get the pan almost off but it hangs up on the lip of the bellhousing. The Haynes manual said to lift the left side of engine about 2 inches and place a block of wood to under it to keep it up. I am assuming that they are referring to the left side when you are in the driver's seat but I don't see good a place for the jack. I do have motor puller I can use if I can find a good lifting point. Any ideas would be appreciated. Thanks, Don.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2.5 Liter Oil Use | knuckledon2 | Dakota Truck Forum | 4 | 08-25-2012 02:28 PM |
2.5 liter conversion to 4.0 liter | guxpert | Jeep Chat (Wrangler, Cherokee, etc...) | 1 | 08-27-2006 11:54 AM |
5.2 Liter detonation | superbee1970440 | Ram Truck Chat | 6 | 02-01-2006 07:25 PM |
Dash removal/header removal | PlumCrazyDart | Restoring your MoPar (Tricks & techniques) | 1 | 06-16-2003 12:56 PM |
will a A-518 bolt up to a 88 3.9 liter??? | emt_156 | Dakota Truck Forum | 0 | 05-08-2002 01:57 PM |