|
#1
|
|||
|
|||
1996 Dodge Dakota replaceing blower motor
I was wondering do i have to remove the complete dash in order to replace the AC/ heater blower motor? I replaced the blower motor resister and it still didnt fix it. I banged on the outside of the heater box several times and it slowly started working again but im sure it wont for long.
|
#2
|
||||
|
||||
If I remember correctly you can remove just the lower portion of the dash by the glove box. That will give you enough room to get the blower motor out. It's been a long time since I did one. Chrysler had good blower motors, compared to brand X vehicles.
|
#3
|
||||
|
||||
If you by chance have to take the whole dash apart, replace the heater core and AC evaporator. That may eliminate having to pull the dash again to replace one of those.
|
#4
|
|||
|
|||
JVMopar is correct, the lower portion of the right dash, vac lines to recirc actuator and 7 screws that secure the blower motor cover to the housing.
|
#5
|
|||
|
|||
Thats what i was hopeing for. I also agree with you on Chrysler haveing good blower motors, because i have a 69 Charger and after it sat for years the original blower motor still works
|
#6
|
|||
|
|||
I agree and the heater core does need to be replaced but this is just a quick fix for someone else.
|
#7
|
|||
|
|||
That sounds great. So i remove the srews and pull the motor forward? Ill have to take it apart to see. It is not my truck and someone wanted a temporary fix
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1996 Dodge Dakota adding freon?? | Mopard | Dakota Truck Forum | 3 | 12-26-2016 09:45 AM |
blower motor speed switch problem 96 Dakota | Mopard | Dakota Truck Forum | 0 | 08-10-2015 03:43 PM |
Blower motor switch question on Dakota | crankshaftkid | Dakota Truck Forum | 6 | 07-23-2003 01:15 PM |
Blower motor switch for 95 Dakota | crankshaftkid | Trucks - Parts Wanted | 0 | 07-13-2003 10:52 PM |
1996 dodge dakota | noha | Performance Talk | 0 | 07-24-2001 01:54 AM |