|
#1
|
|||
|
|||
97 Gts
Hello all, I just purchased my 97 VIPER and encountered my fist anomaly. Can anyone tell me why with doors shut engine running I cannot open driver or passenger doors/
PS - I am not moving when trying to activate door release |
#2
|
|||
|
|||
Welcome to the board Dgo 200.
Here's what the factory service manual says: "The vehicle will automatically lock if the speed is greater than 5 to 8 mph or if CCD communication is lost with the ignition key in the run position." So, you're probably asking "what the hell is the CCD?" The CCD "bus" is the 2 wire communication network that all the computers share information on, your problem probably the result of a faulty control module. Do a google search using ccd bus. I think you will need at least a code reader to troubleshoot or maybe even a DRB III. P.S. I also have a '97 GTS, red. |
Thread Tools | |
Display Modes | |
|
|