|
#1
|
||||
|
||||
3.9 litre
I have a 1991 ram 50. The 2.4 is really tired..and although I have had a 360 powered ram 50 in the past.. I thought a nice nice mild 200 hp 3.9 litre v6 might be perfect for this truck.
This truck already has an A500 in in so swapped a v6 A500 should be a bolt in. Making mounts is a breeze like the 360 powered one I built years ago. I currently get around 23 mpg so I figure I should easily get that with the V6. The truck is only 2400 lbs. Any suggestions on parts for the 3.9. I figured maybe some 318 keith black 9 to 1 pistons. Roller rockers and a good valve job and maybe a bit of porting. I should be able to swap most of the truck wiring in to keep it fuel injected. Thinking about the magnum engine. |
#2
|
||||
|
||||
Just because it has the A500 doesn't mean it will bolt right up. Chrysler used different bell housings for different engines.
|
#3
|
||||
|
||||
You didn't read my post...bolt in...not bolt on.
The A500 should bolt in to the same space at the current A500. I would use the one that comes with the 3.9 litre. |
#4
|
|||
|
|||
Speaking of a v6, a 3.6 sounds good, what with all that power. But the cost would be hard to deal with.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2.5 Litre Turbo Help | TX WJ | Jeep Chat (Wrangler, Cherokee, etc...) | 6 | 07-16-2003 02:36 AM |
4.2 lITRE IDLE | JOHN ORR | Jeep Chat (Wrangler, Cherokee, etc...) | 1 | 12-20-2001 10:07 PM |
3.9 litre hop up | dodgebros | Performance Talk | 1 | 10-17-2000 05:21 AM |
Noisy 3.9 litre | ram100 | Jeep Chat (Wrangler, Cherokee, etc...) | 2 | 10-08-1999 11:03 PM |