|
#1
|
|||
|
|||
360 balancing act
I'm ditching my 318 for a la 360 in my 85 RC. The new 360 is balanced but not sure if it affects what harmonic balancer I need. The machine shop also suggested a flex plate that will work with both the small and large TC. Sure would appreciate some balanced comment.
|
#2
|
|||
|
|||
Balancers are designed to self adjust to dampen rotation wobbles that occur with all engines. To a point that is. Balancing a motor assures you are within a balancer's performance threshold. Aftermarket performance balancers have tighter tolerance and thus tighter harmonic vibration curve at higher RPMs. I have never had any issues with Mopar Performance balancers. ATI is the leader in aftermarket balancers that I've seen.
|
#3
|
||||
|
||||
Find out if the engine is internally balanced or externally balanced.
If it's internally balanced then it's the same as the 318 or 340 engine and a neutral harmonic balancer is required. If its externally balanced then you will need a weighted balancer as well as a converter with a weight on it. This way you can use a neutral flex plate. Romac is another good balancer manufacturer. |
#4
|
|||
|
|||
The fact that the machine shop recommended a specific flexplate tells me it's externally balanced. The 360LA has the largest amount of external balance of any Mopar, so balancing internally is way expensive.
|
#5
|
||||
|
||||
While ATI have the name, BHJ Dynamics in California also do some excellent harmonic balancers. A quick look on their website didn't show up a balancer for the 360 but I'm sure they do one.
The harmonic balancer's job is quite complex. This 'White Paper' from BHJ gives a lot of information about the many variables and different types of balancers used in all types of engines: Damper Technology White Paper : HarmonicDampers.com by BHJ Dynamics, Performance Harmonic Dampers, Harmonic Balancers and Specialty Crankshaft Vibration Dampers |
Tags |
balanced , flex , plate , shop , suggested |
Thread Tools | |
Display Modes | |
|
|