|
#1
|
||||
|
||||
nitrous on 440
i've got a 440 with hyperutectic slugs, cast crank and rods, balanced, lunati voodoo cam, 226-234 duration 452 casting heads slightly ported, and was wondering about puttin a small shot of nitrous on it, kb said the hyperutectics are safe for say a 150 or so shot, all i'm maybe wanting to run is a 100-150 somewhere in that range was thinking about getting one of the adjustable kits that starts out at 50 whats the most compression i can run?? would compression in the 10.0-10.5 or so range be too much?? i'm a newbie to this stuff. any help appreciated
|
#2
|
|||
|
|||
Nitrous on a 440
With the hyperutectic pistons I wouldn't run any more than 125 shot and at that you will have to be careful with the timing. Take 3 to 4 deg out and you should be O.K. Also you may want to richen it up just a little. Better too rich than too lean. Wedgehead
|
#3
|
|||
|
|||
I would consider a 100 shot and tune it down a bit. That 440 can handle it, and you won't worry every time you hit the button for the juice. Just my opine hehe.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
what makes a nitrous motor a nitrous motor? | Chache876 | Power Adders | 14 | 01-05-2005 05:28 PM |
Nitrous 318 | Jhnybgd | Performance Talk | 14 | 12-18-2003 08:19 PM |
Nitrous | hemikota | Dakota Truck Forum | 1 | 08-08-2003 12:53 PM |
anyone know a lot about Nitrous? | 73_RoadRunner | Performance Talk | 9 | 07-16-2003 08:03 PM |
Does anybody have Nitrous? | DodgeRamSprt360 | Ram Truck Chat | 2 | 12-22-2001 10:35 AM |