|
#1
|
||||
|
||||
stroker ???
is it possible for one to have a 502 stroker out of a 440 rb block with a 4.15" crank and with regular lenght 440 rods?? i thought that to have a stroker you had to get different rods, not sure how much he said it was bored, so i don't know the bore.. also can you have a stroker with a standard stock oil pan?? o i posted this in the wrong section, but if it can be answered here that's fine
|
#2
|
|||
|
|||
.060" over 440 with a 4.15 crank is close to 502. It can and most often is done with stock length rods, and the stock oil pan is no problem.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stroker | jtmoney | Dakota Truck Forum | 63 | 10-02-2002 07:00 AM |
318 stroker | TrxR | Performance Talk | 26 | 09-13-2002 12:01 AM |
360 Stroker | TrxR | Performance Talk | 9 | 08-06-2002 08:22 AM |
360 stroker | bobbyg | Performance Talk | 1 | 05-27-2001 08:56 AM |
Eagle 'RB' 4.15 Stroker Crank VS. MP 4.15 Stroker Crank VS. Welded Stock Steel | krownman | Performance Talk | 5 | 03-04-2001 11:47 PM |