Lost lower crank assembly on 340 with 671 - cannot find symetrical spacer
Looking for a supplier of a symetrical spacer for the lower crank pulley and I cannot find a vendor! The previous owner (idiot) some how managed to fit two asymetrical spacers (for a total of 3.5 inches) into a symetircal 340 crank pully (stock) and damper.
The problem arose when the entore assembly including the carank bolt came out while driving - sheered the 6 bolts in the damper. Luckily I was able to remove the remaining bolt ends from the damper. Anyway in trying reassemble the drive pulley, spacers and blower drive pulley the alignment issue came to light.
I confirmed with the damper manufacturer that it's pattern is symetrical (no surprise). Any ideas as to who may carry the proper 6-bolt symetrical spacers?
Help appreciated.
|