Moparchat - Home of MOPAR enthusiasts worldwide!

Moparchat - Home of MOPAR enthusiasts worldwide! (http://www.moparchat.com/forums/index.php)
-   Wheels & Tires Forum... (http://www.moparchat.com/forums/forumdisplay.php?f=12)
-   -   1968 fury III bolt pattern (http://www.moparchat.com/forums/showthread.php?t=109726)

backcrkr 02-13-2008 11:07 AM

1968 fury III bolt pattern
 
does anyone know the bolt pattern for a 1968 plymouth fury convertible?

nhdriver 02-13-2008 11:39 PM

5 lug 4 1/2 bolt circle.

backcrkr 02-14-2008 09:35 AM

how do you measure the bolt circle?

hotrod7043 02-14-2008 07:15 PM

Duh? Tell Him Nh.

nhdriver 02-16-2008 09:47 AM

The bolt circle would be the center of each of the 5 lugs measured from the centerline of the axel (or the spindle on the front wheels) the measurement would be 2 1/4 " (half of the bolt circle) If you took a piece of cardboard & cut it into a 4 1/2 circle, it would intersect the wheel stud in half if laid on top of the lugs, or the bolt holes on a wheel.

dwc43 02-16-2008 03:15 PM

You can also measure from the backside of one stud to the centerline of the stud that's across from it and get 4 1/2" :)


All times are GMT -4. The time now is 08:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.