When is someone going to make Ram fender flares wider than 3" to accomodate the large tires that alot of us have?
|
Haven't measured them - but have to checked out the ones made by Xenon ? They seem to be quality parts . . .
Just my .02 ------------------ "Good Luck on your project." |
They are not any larger than 3"-unless they have come out with a newer style. I have the 3" wide flares & the tires still stick out somewhat & throw everything up in the air & on my truck.
|
what about the bushwhacker cut outs or extend a fenders? i'm pretty sure the cut outs are more than 3 inches...
|
Ruf
I have the extend-a-fenders but I don't think the Bushwackers make the cut outs for the Rams? BB |
billybob..i've seen them advertised in catalogs, etc. but they're always advertised for "most models, chevy, ford, dodge" there's no specific application chart or anything. they may be refering to the older dodges. the way my wheelwells look, i don't think they'd work, at least not unless you remove the inner plastic piece.
|
All times are GMT -4. The time now is 05:23 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.