|
#1
|
|||
|
|||
12 second hemi truck video
this was a few months ago at cecil county dragway i ran 12.75 at 107mph in my 03 hemi truck its a slt longbed with a few mods and a small shot of nitrous...it was on a sunday bracket racing i ran a 1970 plymouth superbird and spanked him... he got to leave 5 tenths before me because of his dial in and i still got the win light.....next time out i will spray the bigger jets this was with the 100hp shot
http://www.speakeasy.org/~lphilippjr...mi777-1275.wmv |
#2
|
||||
|
||||
Awesome truck!! Don't mean to sound like a right-prat but I'm not a fan of funny gas. All engine.
Welcome aboard. Do you have any photos of your ride? |
#3
|
|||
|
|||
Quote:
|
#4
|
|||
|
|||
|
#5
|
||||
|
||||
At nothing wrong with that time eh mate!! Shit, you'd give my stock Challenger a REAL good run.
|
#6
|
||||
|
||||
What are your main goals? 12 second work truck? Or lower!?!?!?
|
#7
|
|||
|
|||
Quote:
|
#8
|
|||
|
|||
keep in mind im pushing over 5000 pounds down the track with not alot of money in mods
|
#9
|
||||
|
||||
wow! that was awsome! what kind of mods,were those 20 inch wheels?
|
#10
|
||||
|
||||
There was an article in MoPar muscle magazine with an old Dodge work truck that had a ladder and tools for all to see. From memory it had a worked 340ci. You might see your truck in there mag if you asked. 11 second work horse is quite an eye catcher and also a great accomplishment.
|
#11
|
||||
|
||||
Wow... Damn good flick! I would like to hear more about those Mods of yours.
Was one of them to pull the # 7 pin (Yellow w/Dark Green stripe) from the bottom connector on the PCM ? You have my attention..... |
#12
|
|||
|
|||
Quote:
my truck is a 03 hemi slt longbed s/cab 3.92 gears 17inch wheels |
#13
|
|||
|
|||
here is a time slip from last spring.... without the nitrous and mickey thompson tires 13.71 at 99mph in the 1/4 mile on stock tires and wheels and only a $100 bucks in mods.......no headers, no programmer, no head work, my motor has never been opened 100% bone stock motor ....race weight was over 5000 pounds
http://dodgetruckworld.tenmagazines....777/152399.jpg |
#14
|
|||
|
|||
here is a picture of the back of my truck with the tool box on
http://dodgetruckworld.tenmagazines....777/152381.jpg |
#15
|
||||
|
||||
So tell us Hemi777, have you raced any ford lightnings?
I understand the lack of a cat and the # 7 wire. I would like to see a picture of your clamped leaf springs. And how did you drop your rear 2 inches? The only drop shackles I could find were the Ground Force 1.5 units... is that what you are talking about. Did you remove your passenger side front seat? I could not see the head rest in the picture. Would your grill mod be anything like the Ram SRT-10 Air grabber/diverter to the intake pickup? What Shocks are you using? Sorry about so many questions, but you do have my interest. |
#16
|
|||
|
|||
Thats alot of power from just removing the cat and few mods. He has my interest as well and I don't have a Hemi, but I'm wishing I did!
|
#17
|
|||
|
|||
Quote:
the spring clamps help with traction and install on the front of the leaf springs you can buy them at most auto stores for $10 bucks and they will also lower your truck 1 inch dmj makes 2inch lowering shackles thats what i have on my truck full stock slt interior..... stock shocks..... grill mod.... is clear plexi glass that goes on the inside of the grill to stop air from entering into the hood and under the truck.... this is a track mod only and works well... better aerodynamics.... very easy to make and only cost $10 bucks im into cheap mods that work.....my 03 hemi slt longbed ran 13.71 at 99mph with cheap mods i had only $100 in mods when i ran 13.71 in the 1/4 mile other things that work are remove the the swaybar for better traction remove air filter, only run 6qt of oil when you run..... put 60 pounds of air in the front tires at the track for the track only and put a dryer vent from the front of truck to the air box for colder air.... i have a homemade true cold air intake made from 3inch pvc pipe that works as good or better then the ones that cost $250 or more and it only cost me $20 bucks to make next mods are lowering the front of truck drag shocks going from 100hp jets to 150hp nitrous jets taking off 200 pounds of weight from my truck spare tire, tailgate, bedliner, smaller lighter front tires and a few more things |
#18
|
|||
|
|||
#7 Pin on ECM
There are 3 or 4 Wire harness going to the ECM Is that where the wire is?
Would it be the lower harness. I know this sounds dumb but this is my first Dodge Truck. Please advise where it at. I could care less about the warrenty. Just that the lag makes me crazy going to 2nd. Love using NOS on my old 92 mustang with few mods 150 HP NOS turned 11.71 1/4 mile ET on M/T slicks. Never a problem using always used both gas & Nos in line filters. Plus a bottle warmer in cold weather. It was street driven with the street tires daily. I also owned two different Lightning trucks (older 351 version) that ran well. This Hemi SWB is a new trick pony for me. I read where they pull about 260 HP 300 lb. torque on a dyno (rear wheel) true duels add about 8 HP 25 lb. torque (cat back type). The Old Racer Ken |
#19
|
||||
|
||||
You pull the bottom connector to the computer, You slide off the cowel to it, and pull the #7 pin (Yellow w/Dark Green stripe)
This *ONLY* applies to the 2003 Hemi Ram. This wire goes to the # 11 pin on the Tranny controller. (03 only) If I understand it correctly, on the 2004 these TWO controllers were combined into a single unit, and this is why you can't modify the 04 like the 03. |
#20
|
|||
|
|||
yes clifcuda65 is right its a great mod it took 4 tenths off mt 1/4 mile and gives you better shifts
|
#21
|
|||
|
|||
And I though I was the only one on earth using a 4 inch dryer vent. Works great dosen't it!
Quote:
|
#22
|
|||
|
|||
Thanks for the tranny info.
I guess I've been overly concerned about the tranny deal. Since mine is a
2004 hemi I guess someone will do a chip or something soon. The truck has great looks and style. I guess I think the 345 HP is overstated. Any new help on the tranny deal or anything to help HP is greatly appreciated. Cat back duels next on the list. I plan a baseline Dyno soon so I know if I'm headed in the right dirrection. Base line I've seen on the Hemi (rear wheels) about 260 HP 300 Torque. I'm real impressed with your truck times it gives me hope on mine I have probable been alittle harsh on the Dodge exsperiance being new to them and a convert from Ford. I would not trade it for a Ford I'll just sit back and learn the tricks I know it has the ability to run after seening your time slips. Thanks for all the help everyone. The old racer Ken 2004 Ram 1500 Hemi SWB Red, Alum. gas cover, all red trim (bumpers) K&N filter 3.92 rear and 20" wheels. 1.5 Shackles (rear) |
#23
|
||||
|
||||
Quote:
I guess I missed the hemi vs superbird video... Anyone still have the clip on their hard drive? |
#24
|
|||
|
|||
12.75 Video
undefined I will try to attach the video Sorry I exceeded the maximum time allowed for uploading.
|
#25
|
|||
|
|||
Quote:
try this one for the superbird vs hemi truck dragracing....remember its bracket racing the superbird got a 5 tenth headstart because of his dial..... in if you look at the timming lights you will see i got the win light http://www.speakeasy.org/~lphilippjr...mi777-1275.wmv |
#26
|
||||
|
||||
Quote:
Was the big SUV that drove by in the other direction part of the drag race?.... I've never seen the flame icon before....above... Happy Halloween.... |
#27
|
|||
|
|||
Quote:
|
#28
|
||||
|
||||
Quote:
My apologies.... Here's two pictures of a Police and Fire Ram truck.... |
#29
|
|||
|
|||
That pumpkin is great.
Hemi777 Thanks for video and listing some of the mods you've made. Let us know when you hit the 11's |
#30
|
||||
|
||||
No video, but it sounds like a Mover
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Video Hemi Build Part 2 | Maxwedge | Rumors and Gossip, etc... | 0 | 06-07-2015 05:36 PM |
Video Hemi Build part 1 | Maxwedge | Rumors and Gossip, etc... | 0 | 06-07-2015 05:35 PM |
In Truck Video | thestickboy | Circle Track Chat | 8 | 03-04-2006 11:50 AM |
In Truck Video of Crash | thestickboy | Circle Track Chat | 2 | 10-02-2005 04:23 PM |
hemi truck nitrous video | hemi777 | Ram Truck Chat | 10 | 04-30-2005 03:11 PM |