|
|
#1
|
||||
|
||||
440 stock cam specs??
what were the specs on the stock 440?? also what was the specs on a 77 rv 440???
|
#2
|
|||
|
|||
Two cam profiles were used in most 440's.
These are listed from my 1971 Factory Service Manual: The Standard 350 HP cam specs: 260/268 Duration, 0.425"/0.435" lift, 38 degrees overlap (113 LSA), installed at 112 Intake CL. The HP 375 HP cam specs: 268/284 Duration, 0.450"/0.458" lift, 46 degrees overlap (115 LSA), installed at 113 Intake CL. I have a '74 FSM for the dodge trucks, and it also listed the 268/284 HP cam as the cam used in the 440 for that year. I don't have a 1977 Factory Service Manual, so I can not be sure of the cam specs, but it is likely the same since the cams above seem to be the only stock replacement ones avaliable? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
specs for stock cam | realdeal6973 | Ram Truck Chat | 6 | 04-08-2002 12:43 PM |
stock cam specs | Eric111 | Ram Truck Chat | 1 | 04-16-2001 04:41 PM |
Stock 360 cam specs | johnny | Performance Talk | 1 | 03-24-2001 02:37 PM |
Stock Cam Specs. | PSIRam | Ram Truck Chat | 2 | 02-19-2001 03:05 PM |
Stock Cam Specs | Joe-Pa | Ram Truck Chat | 7 | 05-12-2000 10:50 PM |