|
#1
|
|||
|
|||
A body bell housing
Im putting a 360 / 4speed in a 64 valiant & running into problems. I have a lakewood & it wont fit. any help appreciated looks like the stock one was a 8 or 9 inch flywheel. Mines a 10 1/2 thanks
|
#2
|
||||
|
||||
The 10½ clutch will fit, its flywheel is about 13" IIRC...
You will need a standard bellhousing. I assume you have a flywheel which has been drilled to give the right balance with the externally-balanced crank? |
#3
|
|||
|
|||
think ive got it, used a stock 10 1/2 thanks
|
Tags |
appreciated , flywheel , inch , mines , stock |
|
|