|
#1
|
|||
|
|||
Shocks for SS/T????
I going to put new shocks on my SS/T and wanted to know what some good shocks were. I tried the search feature but the messages had no body text.
I have come across Edelbrock IAS Performer shocks but do not know if they are any good. Thanks in advance, Bob |
#2
|
|||
|
|||
I have had the $79 list price Edelbrock IAS shocks on my 2wd 1500 Ram for
about 5 years & 70,000 miles now. They improve the sway in corners, reduce nose dive on braking, and generally feel more in control - but they are pretty stiff when new, and the on-pavement ride suffers some compared to the soft factory installed gas charged shocks designed to impress potential buyers during on-highway test drives. Don't believe the hype about 'luxury car' ride with the Edelbrock IAS, but the bit about being able to go over speedbumps without 'buck & wave' afterwards is indeed true. Temperature seems to affect the IAS shock damping a little, with hot summer days giving a softer ride than cold winter days. On/Off road the control is good with almost no after pothole gyrations or washboard road over-reaction. I personally like the ride a little better now that my 4x2 Ram IAS shocks have 60K of wear on them versus the stiffer ride when they were brand new. For off road driving several Ram owners have remarked that taking off the Ram's front sway bar improves articulation and ride. The IAS shocks work well without the sway bar off road and on pavement, perhaps because of their own internal anti- sway valving. I have removed the anti-sway bar on my 1995 2wd CC Ram and have felt a noticeable improvement in ride when one wheel hits a bump that the other wheel does not. Body lean in turns is still low. I now have a lot of experience without the sway bar and have personally found no downside to removing it for the type of driving I do. (Before flaming me on this I would ask that you read the sway bar links I list below) If you buy the Edelbrock IAS for a Ram, watch to see that the steel bushings inside the rear shock upper rubber bushings are there, otherwise you will need to swap them in from the old factory shocks - the steel bushing keep you from over-tightening the mounting bolts, which is important as the specified torque on the mounting bolts is fairly high. I also had to open up one of the front washer holes on the front IAS shocks to get it to properly fit. In addition to the $79 IAS {there have been "buy 3 get the 4th free" and $25 mail in rebate programs approximately 2 times per year} Edelbrock is now selling a double wall and cheaper version shock - but I don't see any advantage to the new design except low price. Monowall shocks are generally superior. http://www.edelbrock.com/automotive/ias_shocks.html The Tenneco-owned Monroe brand Reflex shock is 'velocity sensitive valving' design and said to be an attempted copy of the Edelbrock IAS. The $30 Reflex is supposed to be softer for moderate on highway use. Tenneco also owns Rancho, and sells a Reflex-like shock with stiffer valving as the $53 Rancho model RSX for off roading. http://www.a-1shocks.com/reflex/index.htm http://www.monroe.com/Reflex_technology.htm Quite a few people have said that the like the adjustability of the Rancho model 9000 shocks. Most say that twisting the knob to adjust them is not hard and can be done in less than 5 minutes, although some owners would like an extended 'tool' to reach in and do it. Setting 2 is soft and 4 is rock hard. I haven't heard of the 9000's leaking so much as the exterior rusting badly after a few years. An extra coat of good urethane paint on each shock prior to installation might help. Explorer ProComp is now making a gas charged monowall 6-way adjustable shock called the MX6. {Tenneco used to make the ProComp shocks on their assembly line under contract, but I don't know if that is true of the new shock design or not.} The last time I looked at the ExplorerProcomp webpage they didn't have the new 6-way adjustable shock written up yet, and as of May 2002 they did not list any MX6 part numbers for Dodge Ram trucks, just Chevy and Ford. http://www.explorerprocomp.com/shocks.html I haven't heard as many good things about the Rancho 5000 shocks. They are stiffer than the factory Ram shocks, but I have heard Ram owners who bought 5000 later say they wished they had gone with 9000s. http://www.gorancho.com/products.stm Delphi Automotive (used to be AC Delco of GM but now independent) has a $500 electronically controlled adjustable aftermarket shock system that can be adjusted from the cab but does not need an air compressor. Delphi has been demo'ing this at auto shows but I haven't seen an installation personally. http://www.delphiautomotive.com/ The Kenne Bell Company says that they tested all shocks for their specialty decked out Rams and Durangos and decided upon the Bilstein. Hotchkis Performance Suspensions also says the Bilstein is best for Rams and Dakotas if handling is your main goal, and use this shock in their retro-fit handling kits. The ride of the Bilstein is not supposed to be overly harsh on pavement either. http://www.bilstein.com/index2.html http://www.kennebell.net Sway A Way has some 'extra fat' shocks that have physically larger bodies and rods for heavy duty off-road applications: http://www.swayaway.com/Shock%20frameset.htm Doetsch Tech 8000's on a Ram have had a favorable review from one Ram owner who claims to have tried Rancho, Monroe, and Edelbrock previously. This is a intermediate price, dual wall shock, with an large diameter body. Gas charged KYB shocks have been reviewed as being good for cornering and smooth twisty pavement in Ram pickup use, but very stiff on pot-holed city streets. In the cheap shock category, Gabriel LT VST's have been reported to do ok with a ride generally on the soft side. They run anywhere from $16.99 to $25 each, depending on if you can find them on sale. http://www.gabriel.com Other shock & suspension websites worth a visit: http://www.shox.com/suppliers.html http://www.tokicogasshocks.com/index.html Also note the lightweight composite loaf leaf springs for Ram rear leaf springs at the above Tokico website. There is additional custome made fiberglass spring info at: http://www.hypercoils.com/text/leafsprings.htm http://flex-a-form.com/ More shock links: Some interesting Java calculators pertaining to shocks: http://www.proshocks.com/calcs/ Sway Bar/Suspension links and explanations: http://www.howstuffworks.com/question432.htm http://mchambers.members.easyspace.com/swaybar.htm http://www.teamscr.com/sway.htm http://suspension.com/stam-bar.htm Further Unusual Suspension mods for Rams & other off road vehicles: http://www.kinetic.au.com/index.html http://www.keldermanmfg.com/airride.htm The "Roadmaster" top of spring control coil add-on below has gotten good reviews so far from Ram and Dakota owners who have tried them: http://www.activesuspension.com/ Velvet ride shackles have gotten mixed reviews on Rams. I haven't read a single positive review of Velvet Rides on 1500 series Rams, but some 2500/3500 Ram owners have written that they 'help a little bit when unloaded.' http://www.drivetrain.com/velvetrideinst.html |
#3
|
|||
|
|||
I just removed my Hotchkis rear springs because I couldn't take the rough ride, but the handling was great. I decided to use the Bilstein shocks with the stock rear springs and really like the ride. The Bilsteins are very strong and do help firm up the milder stock suspension. Handling is still excellent.
So Bilsteins all the way! |
#4
|
|||
|
|||
Great Information.
Thanks guys for the insight.
HankL, Thanks a lot for your information. That is very interesting on the front sway bar. I have not finished reading all of the links but I should soon. I used to run the Air Rancheros in my Ford Ranger and loved them but it was somewhat of a bumpy ride. My Saturns had Macpherson Struts and those were nice but not for trucks. I believe I am still on the factory shocks but I am not sure what the put on them to begin with. My SS/T is just about to hit 100,000 miles and my warranty is over so I can to modify it without fear of hassle with the warranty. I will figure it out over the next week and get them on order. I cannot wait. Thanks again, Bob |
#5
|
|||
|
|||
I just put Monroe sens a trac shocks on my ram and love the way it rides now. $36.99 at Advance auto parts.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
shocks | got2mopars | Vintage MOPAR chat | 3 | 03-23-2015 08:38 PM |
shocks | robike | Ram Truck Chat | 2 | 04-01-2004 09:12 PM |
Which Shocks???? | Silver_V10 | Ram Truck Chat | 2 | 06-18-2002 10:55 AM |
RANCHO 9000s for Drag Shocks and Front Shocks? | moparmac | Performance Talk | 3 | 11-07-2001 10:44 AM |
KYB shocks?? | 2000dak4.7 | Dakota Truck Forum | 12 | 05-29-2001 07:04 AM |